Download STL Upgrade files RS-CNC to RS-CNC32 (For the new TFT, mounts in place of the old one without new holes needed)
Printed parts list :
| Name | Quantity | Infill | Comment |
|---|---|---|---|
| CNC32_TFTcover | 1 | 20/30% | PLA |
| support_CNC32_TFT | 1 | 20/30% | PLA |
Non printable parts:
| Name | Quantity | Comment | Link |
|---|---|---|---|
| GRBL 32 bit board Kit | 1 | Boutique | |
| STM32 Bluepill | 1 | Aliexpress Banggood |
|
| ESP32 (2x19pins version) | 1 | Choose "ESP-32 NodeMCU" option | Aliexpress Aliexpress |
| TFT 3.2" Touchscreen | 1 | Choose "touchscreen" option | Aliexpress Aliexpress |
| ST-link V2 | 1 | Aliexpress Banggood |
|
| Front USB port / microUSB | 1 | Aliexpress | |
| Shielded cable for endstops | 5 meters | choose "2 core" | Aliexpress |
Optional:
| Nom | Quantité | Commentaire | Lien |
|---|---|---|---|
| Z-Probe | 1 | Aliexpress | |
| Fraise pour le bois (deux lames droites | Aliexpress | ||
| Fraise pour l'alu et le plexi/plastique (une lame hélicoïdale) | Aliexpress | ||
| Fraise pour le carbone et fibre de verre (type diamant) | Aliexpress | ||
| adaptateur 1/4"->1/8" (6.35mm->3.175mm) | Pour adapter les fraises 3.175 au collet 6.35 du routeur | Aliexpress |
New TFT assembly (To do after wiring)
- Tape M3 all the holes of the brackets and screw them to the CNC on the holes made on the box screed
- Connect the UART cable connected to the Control board and the USB port cable
- Screw the TFT board (without the TFT) to the stand
- Plug in the pins header of the TFT on its module
- Press the cover (SD slot down, Nunchuk socket on the left)
- Connect Nunchuk plug (refer to the shape of the plug on the printed cover to make no mistake)
Note: The fan shown in the photos is not there to cool the TFT but for the air flow of my soundproof housing, you don’t need to ventilate the TFT.