Hi,
I'd like to flash the firmware of touchscreen on ESP32 for GRBL 32 bits Board V1.5 but the arduino IDE return the follow message:
--------------------------------------------------------------------------------------------------------------------------------------------------
The sketch uses 1543530 bytes (117%) of the space available for programs. The maximum is 1310720 bytes. Text section exceeds available space in board
Global variables use 86476 bytes (26%) of dynamic memory, leaving an additional 241204 bytes free for local variables. The maximum is 327680 bytes.
Sketch too big; see https://support.arduino.cc/hc/en-us/art ... 0013825179 for tips on reducing it.
Error compiling for WEMOS LOLIN32 card.
--------------------------------------------------------------------------------------------------------------------------------------------------
can anyone help me please?
thanks in advance
Salomon
ESP32 Firmware Upload
Re: ESP32 Firmware Upload
...sorry i forgot to mention i get the same problem for the ESP32 Dev Module board...
- RoMaker
- Administrateur du site
- Messages : 5064
- Enregistré le : 02 janv. 2017 20:24
- Localisation : Montpellier
- Contact :
Re: ESP32 Firmware Upload
Hi, you didn't selected MINIMAL SPIFFS as explained in the tutorial:
https://www.makerfr.com/en/cnc/grbl-32- ... esp32-tft/Go to “Tools” > “Scheme partition”, choose “minimal SPIFFS”
Re: ESP32 Firmware Upload
Hi, Thanks for your answer.
yes, I followed the instructions and I selected MINIMAL SPIFFS as explained in the tutorial but it doesn't work properly.
I've just solved the problem usingchoosing:
Huge APP(3MB No OTA/1MB SPIFFS)
I don't anderstan the reason
thanks anymore
s
yes, I followed the instructions and I selected MINIMAL SPIFFS as explained in the tutorial but it doesn't work properly.
I've just solved the problem usingchoosing:
Huge APP(3MB No OTA/1MB SPIFFS)
I don't anderstan the reason
thanks anymore
s