Printables parts
Download the free pack of STL files to print in PETG or PLA
All parts have already been oriented correctly for printing, they all print as is, without supports, except for one part (indicated in the table comment)
| Name | Quantity | Comment |
|---|---|---|
| Back_Left_Endstop_Holder | 2 | |
| Back_Right_Endstop_Holder | 1 | |
| Chain_X_Top | 1 | |
| Chain_Y_bottom | 1 | |
| Chain_Y_Top | 1 | |
| CNC_Leg | 4 | |
| Corner_Back_Left | 1 | |
| Corner_Back_Right | 1 | |
| Corner_Front | 2 | |
| Front_Bearing_Left | 1 | |
| Front_Bearing_Right | 1 | |
| X_left_bearing | 1 | |
| X_Left_Endstop_Holder | 1 | |
| X_motor | 1 | |
| X_right_bearing | 1 | |
| X_Right_Endstop_Holder | 1 | |
| Y_Ballscrew_Fix_Left | 1 | |
| Y_Ballscrew_Fix_right | 1 | |
| Y_Bearings | 2 | to print with supports, do not change the orientation of the STL. |
| Z_axis_Plate_Spacers | 8 | |
| Z_BallNut_fix | 1 | |
| Z_bearings_holder | 1 | |
| Z_nema_holder | 1 |
Screws
| Name | Quantity |
|---|---|
| Screw CHC M5x16 | 14 |
| Screw CHC M5x20 | 8 |
| Screw CHC M5x25 | 38 |
| Screw CHC M5x30 | 26 |
| Screw CHC M4x8 | 43 |
| Screw CHC M4x12 | 2 |
| Screw CHC M4x14 | 68 |
| Screw CHC M4x18 | 26 |
| Screw CHC M4x20 | 16 |
| Screw CHC M4x25 | 4 |
| Screw CHC M2x10 | 12 |
| Screw CHC M8x90 | 4 |
| Nut M4 | 4 |
| Nut M5 | 32 |
Material
| Name | Quantity | Comment | Link |
|---|---|---|---|
| Alu profile 20x80 Lenght 800mm | 2 | Enter the desired length when ordering | Motedis Europe Motedis USA |
| Alu profile 20x80 Length 714mm | 2 | Enter the desired length when ordering | Motedis Europe Motedis USA |
| Alu profile 20x80 Lenght 820mm | 1 | Enter the desired length when ordering | Motedis Europe Motedis USA |
| Alu profile 20x60 Lenght 820mm | 1 | Enter the desired length when ordering | Motedis Europe Motedis USA |
| T-nut M4 | 100 | Motedis Europe Motedis USA |
|
| Steel angle 40X40 lenght 820mm (X-axis reinforcements) | 2 | ||
| Tray support angles | 2 | ||
| Tray support angles | 2 | ||
| MDF or plywood board thickness 22mm size 810x724mm (to make tray) | 1 | Have it cut to size at a DIY store | |
| 10mm aluminum plate for the Z-plate (see page "parts to build") | 1 | ||
| 10mm aluminum plate for the X-plate (see page "parts to build") | 1 | ||
| 4mm aluminum plate for spacers (see page "parts to build") | 1 | ||
| 15mm aluminum plate for the gantry vertical parts (see page "parts to build") | 1 |
Mechanical parts
| Nom | Quantité | Commentaire | Lien |
|---|---|---|---|
| HGR15 rails 800mm with HGH15CA blocs | 2 pairs of 800mm rails with a total of 8 HGH15CA blocs | On this link, choose "800mm" then "HGH15CA" and "quantity 2" | Aliexpress |
| HGR15 rails 250mm with HGH15CA blocs | 1 pair of 250mm rails with 4 HGH15CA blocs | On this link, choose "250mm" then "HGH15CA" and "quantity 1" | Aliexpress |
| Ballscrew SFU1204 250mm | 1 | Aliexpress | |
| Ballscrew SFU1204 850mm | 1 | Aliexpress | |
| Ballscrew SFU1204 800mm | 2 | Aliexpress | |
| 10mm nuts for ballscrews | 4 | choose "M10x1" | Aliexpress |
| 7000AC angular contact bearing | 8 | Aliexpress | |
| 608ZZ ball bearing | 3 | Take good quality like on my link (Fushi) | Aliexpress |
| .35/8mm couplers | 3 | choose 6.35x8 | Aliexpress |
| 3M 20 teeth pulley, for 10mm belt, 8mm inner diameter | 1 | Aliexpress | |
| 3M 20 teeth pulley, for 10mm belt, 6.35mm inner diameter | 1 | Aliexpress | |
| 3M closed belt 192mm, width 10mm | 1 | Aliexpress | |
| Alu spindle support | 1 | Diameter to choose according to the diameter of your spindle | Aliexpress |
| Dragchain 10x30 | 2 | Aliexpress | |
| Threaded nuts M8x15 for the tray | 75 | Aliexpress |
Electricity / Electronic
| Name | Quantity | Comment | Link |
|---|---|---|---|
| Motors Nema23 57x76mm | 4 | Aliexpress | |
| Drivers DM542T Stepperonline | 4 | The ones in the link are good quality not like some cheaper "fake" ones | Aliexpress |
| Power supply 36V | 1 | Choose 36v 400W | Aliexpress |
| Switchs endstops | 6 | Aliexpress | |
| Shielded cable for limit switches (2 wires, 22AWG) | 15 meters | Choose 22AWG, 2cores | Aliexpress |
| Cables for motors 20AWG | 20 meters | choose 20AWG, 4cores | Aliexpress |
| MakerFr GRBL32bits board | 1 | Boutique | |
| ESP32 38pins modules | 2 | Aliexpress | |
| 3.2" Touchscreen | 1 | Choose "3.2 inch with TOUCH" | Aliexpress |
| RJ45 cable | 1 | Take a shielded one with the metal sockets around it. Maximum recommended length 50cm | Aliexpress |
| Micro SD reader | 1 | Aliexpress | |
| Wii Nunchuk | 1 | Aliexpress | |
| Z-probe | 1 | Aliexpress | |
| 5V power supply (delivering 3A minimum) Round plug 5.5*2.5mm | 1 | I got the 5A model so I could cut the power cord and integrate it into my wiring. | Aliexpress |
Spindles
The Roxyz allows you to mount all kinds of spindles.
To take full advantage of this machine and mill aluminum easily, I recommend taking a spindle with a minimum power of 1.5kw
Liquid cooling is optional, it makes the spindle quieter, more reliable (dust-tight), and does not blow/disperse dust throughout the room as with air cooling.
| Name | Comment | Link |
|---|---|---|
| Spindle G-Penny 2.2kw watercooled | This is the one I mounted on my Roxyz, I took the ceramic bearing option. | Aliexpress |
Optional
| Name | Link |
|---|---|
| End mill to cut Aluminium | Aliexpress |