kulfon250wr a écrit : ↑09 oct. 2023 18:15
Approx.
If I use these two new methods, do I need to load TFT or GRBL first?
It doesn't matter, because there are 2 different ZIP files.
- This one to upload the Grbl_Esp32 firmawre into a first ESP-32 module ;
- This other to upload (or re-upload) the firmware of the TFT into a second ESP-32 module.
Explanations are in the install_note.txt files you will find in the respective ZIP files. Read them. You can even translate them in Polish, with an online traductor like Google translator, or better like DeepL.
The uploading procedure of Grbl_Esp32 is plug'n play. Just connect an ESP-32 module (it has to be took off from the Grbl board v.2.0) to the USB port of your PC, with an USB-A to micro USB data cable.
Once done clic the win64_erase.bat file and wait until you read "Press a key to close the windows" or a message like this ;
Once the windows has closed, clic the win64_install_GRBL_ESP32_XYZA.bat file (for the RS-CNC32) and wait until you read "Press a key to close the windows" or a message like this... and press the key ;
Your ESP-32 module now contains Grbl_Esp32 and WebUI. You plug it onto the Grbl board v.2.0.
The procedure to upload the firmware of the TFT in the other ESP-32 module is identical. But once done and you have plugged the ESP-32 module containning the TFT firmware on the Grbl adapter board, you have to configure your Wi-Fi preferencies using a wifi.cfg file to put at the SD card root you will insert into the memory cards reader at the bacside of the TFT. Start the TFT and your Wi-Fi setting will be uploaded to the ESP-32.
kulfon250wr a écrit : ↑09 oct. 2023 18:15
It's a pity that there is no manual describing how to reprogram the ESP-32 using these methods.
There are, in French and English their respective archive files, as I wrote.
kulfon250wr a écrit : ↑09 oct. 2023 18:15
Is there anything else I need to do apart from these two uploads? The instructions on the website show the option with Arduino IDE soft, there are 3 steps, here you can only see 2?
I think that many people like me are not strong in this topic
Do not care about the tutorials of the web site. The procedures I gave you will do exactly the samein with only respective 2 and 3 operations.
See ya,