Firmware 2.0.x vs 2.1.g
- kulfon250wr
- Messages : 32
- Enregistré le : 04 mai 2023 01:18
- Localisation : Poland
- Contact :
Firmware 2.0.x vs 2.1.g
Hello
I have firmware version 2.0.x is it worth upgrading to version 2.1.g??
In my machine, it happens that when cutting for a long time (a lot of elements), the software hangs, the spindle stops or goes in the wrong direction. Can an upgrade help?
B/r
Maciej
I have firmware version 2.0.x is it worth upgrading to version 2.1.g??
In my machine, it happens that when cutting for a long time (a lot of elements), the software hangs, the spindle stops or goes in the wrong direction. Can an upgrade help?
B/r
Maciej
Re: Firmware 2.0.x vs 2.1.g
Hi kulfon250wr,
Actually, we are at the version 2.1.jOTA (26 april 2023) for the TFT firmware. I invite you to update anyway.
The update will probably not solve your issue of motors going in the wrong way. For that, I suggest to check the DIR- wire connections of the concerned drivers. Check their connections between the drivers and the Grbl board. DIR- signal controls the way of rotation of the motors.
See ya,
Actually, we are at the version 2.1.jOTA (26 april 2023) for the TFT firmware. I invite you to update anyway.
The update will probably not solve your issue of motors going in the wrong way. For that, I suggest to check the DIR- wire connections of the concerned drivers. Check their connections between the drivers and the Grbl board. DIR- signal controls the way of rotation of the motors.
See ya,
Gilles, aéromodéliste (RC aeromodeller)
Contributions sur thingiverse (contributions on thingiverse)
Assembly manual of the RS-CNC32
Service de dépannage / Troubleshooting service
Contributions sur thingiverse (contributions on thingiverse)
Assembly manual of the RS-CNC32
Service de dépannage / Troubleshooting service
- kulfon250wr
- Messages : 32
- Enregistré le : 04 mai 2023 01:18
- Localisation : Poland
- Contact :
Re: Firmware 2.0.x vs 2.1.g
Hello
Thx for answer, but
The problem is that the plotter cuts well for 40 minutes and suddenly goes stupid, it's not a connection problem, it's something in electronics or software that causes it
Thx for answer, but
The problem is that the plotter cuts well for 40 minutes and suddenly goes stupid, it's not a connection problem, it's something in electronics or software that causes it
- kulfon250wr
- Messages : 32
- Enregistré le : 04 mai 2023 01:18
- Localisation : Poland
- Contact :
Re: Firmware 2.0.x vs 2.1.g
Problem with Firmware in Arduino..
Vous n’avez pas les permissions nécessaires pour voir les fichiers joints à ce message.
- rominetb44
- Messages : 686
- Enregistré le : 10 déc. 2020 13:06
Re: Firmware 2.0.x vs 2.1.g
Hi,
Which OS are you using ?
Which version of Arduino are U using ?
What is the size of your TFT ?
Regards,
Which OS are you using ?
Which version of Arduino are U using ?
What is the size of your TFT ?
Regards,
- kulfon250wr
- Messages : 32
- Enregistré le : 04 mai 2023 01:18
- Localisation : Poland
- Contact :
Re: Firmware 2.0.x vs 2.1.g
Arduino 2.1.0
MacOs Ventura 13.4
TFT 3,2"
Board 1.0-1.5
MacOs Ventura 13.4
TFT 3,2"
Board 1.0-1.5
- rominetb44
- Messages : 686
- Enregistré le : 10 déc. 2020 13:06
Re: Firmware 2.0.x vs 2.1.g
Hi,
I think it is an issue of Arduino 2.1.0 or MacOs (I'll try tomorrow).
You should better use Arduino 1.8.19.
However, I fix the issue changing the name of the files.
You could try it : https://github.com/rominetb44/grbl_cont ... master.zip
Let's me know if it's ok.
See u
I think it is an issue of Arduino 2.1.0 or MacOs (I'll try tomorrow).
You should better use Arduino 1.8.19.
However, I fix the issue changing the name of the files.
You could try it : https://github.com/rominetb44/grbl_cont ... master.zip
Let's me know if it's ok.
See u
- kulfon250wr
- Messages : 32
- Enregistré le : 04 mai 2023 01:18
- Localisation : Poland
- Contact :
Re: Firmware 2.0.x vs 2.1.g
The same situation, tomorrow i try Arduino 1.8.19
Vous n’avez pas les permissions nécessaires pour voir les fichiers joints à ce message.
- rominetb44
- Messages : 686
- Enregistré le : 10 déc. 2020 13:06
Re: Firmware 2.0.x vs 2.1.g
I think it is due to bracket....
Let me know with Arduino 1.8.19. Otherwise, I will change the name of this files.
see U
Let me know with Arduino 1.8.19. Otherwise, I will change the name of this files.
see U
- rominetb44
- Messages : 686
- Enregistré le : 10 déc. 2020 13:06
Re: Firmware 2.0.x vs 2.1.g
In fact, these files are no longer used...rominetb44 a écrit : ↑04 mai 2023 21:35 I think it is due to bracket....
Let me know with Arduino 1.8.19. Otherwise, I will change the name of this files.
see U
You can dowload again the firmware :
https://github.com/rominetb44/grbl_cont ... master.zip
See U.