Hi, I have a 24v laser and would like to know if it is possible to connect it to the 1.5 board.
Thank you.
24v Laser
Re: 24v Laser
Hi Salmonelo,
To power it, no, because you won't have enough intensity. The problem doesn't really come from the Grbl board v. 1.5 but from the power supply itself. You have to add a dedicated external 24V power source to power the laser.
I have deleted the same message you posted in the French section of the forum. Please do not multiply the messages. Many members read them all, whether they are in the French or international section of the forum. (HTheatre for the moderation).
See ya,
To power it, no, because you won't have enough intensity. The problem doesn't really come from the Grbl board v. 1.5 but from the power supply itself. You have to add a dedicated external 24V power source to power the laser.
I have deleted the same message you posted in the French section of the forum. Please do not multiply the messages. Many members read them all, whether they are in the French or international section of the forum. (HTheatre for the moderation).
See ya,
Gilles, aéromodéliste (RC aeromodeller)
Contributions sur thingiverse (contributions on thingiverse)
Assembly manual of the RS-CNC32
Service de dépannage / Troubleshooting service
Contributions sur thingiverse (contributions on thingiverse)
Assembly manual of the RS-CNC32
Service de dépannage / Troubleshooting service
Re: 24v Laser
Thank you HTheatre, my doubt was whether there is no problem connecting the GND and PWM on the board despite having a 24v power sourceHTheatre a écrit : ↑12 déc. 2022 09:54 Hi Salmonelo,
To power it, no, because you won't have enough intensity. The problem doesn't really come from the Grbl board v. 1.5 but from the power supply itself. You have to add a dedicated external 24V power source to power the laser.
I have deleted the same message you posted in the French section of the forum. Please do not multiply the messages. Many members read them all, whether they are in the French or international section of the forum. (HTheatre for the moderation).
See ya,
Re: 24v Laser
Re Salmonelo,
See ya,
I confirm you can connect the GND of the Grbl board to the GND of your external 24V power source. It will only slightly increase the risk of interferencies on the endstops ways.
See ya,
Gilles, aéromodéliste (RC aeromodeller)
Contributions sur thingiverse (contributions on thingiverse)
Assembly manual of the RS-CNC32
Service de dépannage / Troubleshooting service
Contributions sur thingiverse (contributions on thingiverse)
Assembly manual of the RS-CNC32
Service de dépannage / Troubleshooting service