TFT / Touchscreen problem
Posté : 24 août 2020 05:58
Tout fonctionnait bien mais je voulais faire un nouveau câble qui allait du GRBL au TFT. Le premier que j'ai fait était un peu délicat si vous le remuiez. Fait un nouveau câble branché et le TFT ne s'allume même pas. Utilisé mon multimètre pour vérifier la continuité sur le câble tout bon. J'ai utilisé ma loupe pour regarder tous les connecteurs bien. Branché l'ancien câble et rien ne fonctionne. Branché un câble USB de mon ordinateur à l'ESP32 et l'écran s'allume et fonctionne correctement.
Je suis perplexe, que me manque-t-il?
Everything was working fine but I wanted to make a new cable that went from the GRBL to the TFT. The first one I made was a little touchy if you wiggled it. Made a new cable plugged it in and the TFT doesnt even turn on. Used my multimeter to check continuity on the cable all good. Used my magnifying glass to look over the connectors all good. Plugged the old cable in and nothing works. Plugged a USB cable from my computer in to the ESP32 and the TFT screen turns on and works fine.
I am stumped, what am I missing?
Thank you!
Je suis perplexe, que me manque-t-il?
Everything was working fine but I wanted to make a new cable that went from the GRBL to the TFT. The first one I made was a little touchy if you wiggled it. Made a new cable plugged it in and the TFT doesnt even turn on. Used my multimeter to check continuity on the cable all good. Used my magnifying glass to look over the connectors all good. Plugged the old cable in and nothing works. Plugged a USB cable from my computer in to the ESP32 and the TFT screen turns on and works fine.
I am stumped, what am I missing?
Thank you!