Homing X and Y
-
- Messages : 11
- Enregistré le : 24 avr. 2020 02:56
Re: Homing X and Y
Thanks will update
-
- Messages : 11
- Enregistré le : 24 avr. 2020 02:56
Re: Homing X and Y
That worked perfect! Thanks so much for the helpstu_le_brew46 a écrit : ↑02 août 2020 11:24 I have just checked my notes on GRBL, its the $23 command which changes the direction for homing so in my case $23=2 inverts the Y axis homing, sorry should have checked my notes earlier, anyway this should fix the homing issue