Uneven Bed Level
Posté : 27 mars 2020 13:53
hello dear
i have a problem strugling from the first day build.
now i have genuine BLTouch v3.0 still the same problem i can print only on one side of the bed
other part are high level cant touch the bed and right side nozzle cuts the PEI sheet.
i used pronterface with G29 command it gives me this results
0 1 2
0 -0.043 -3.120 -8.118
1 -0.338 -0.713 -1.888
2 -0.548 -2.315 +0.055
and this is from repetier
13:43:55.396 : Bilinear Leveling Grid:
13:43:55.396 : 0 1 2
13:43:55.396 : 0 -0.058 -3.003 -7.795
13:43:55.396 : 1 -0.268 -0.553 -1.782
13:43:55.396 : 2 -0.482 -2.177 +0.135
13:43:55.396 : X:174.50 Y:199.00 Z:10.69 E:0.00 Count X:17450 Y:19900 Z:4072
as you can see bed level is not right but meaning of using BLtouch should fix this leveling right
is there any small point that i am missing to work this out.
im bussy with printing of CNC parts small pars are ok to me but with large parts its impossible
kindly
i have a problem strugling from the first day build.
now i have genuine BLTouch v3.0 still the same problem i can print only on one side of the bed
other part are high level cant touch the bed and right side nozzle cuts the PEI sheet.
i used pronterface with G29 command it gives me this results
0 1 2
0 -0.043 -3.120 -8.118
1 -0.338 -0.713 -1.888
2 -0.548 -2.315 +0.055
and this is from repetier
13:43:55.396 : Bilinear Leveling Grid:
13:43:55.396 : 0 1 2
13:43:55.396 : 0 -0.058 -3.003 -7.795
13:43:55.396 : 1 -0.268 -0.553 -1.782
13:43:55.396 : 2 -0.482 -2.177 +0.135
13:43:55.396 : X:174.50 Y:199.00 Z:10.69 E:0.00 Count X:17450 Y:19900 Z:4072
as you can see bed level is not right but meaning of using BLtouch should fix this leveling right
is there any small point that i am missing to work this out.
im bussy with printing of CNC parts small pars are ok to me but with large parts its impossible
kindly