Hello !
Je suis tombé sur une série de vidéos d'un Autrichien qui s'est fait une RS-CNC32 avec un meuble de l'espace !
Les vidéos me font penser à celles qu'avait fait Woodref pour la R-CNC, très bonne qualité
Re: [vidéos] Montage d'une RS-CNC32 en Autriche
Posté : 13 janv. 2020 14:43
par Yoann H
Il m'a tué
C'est beau d'être si bien équipé et d'être aussi doué pour bien les utilisés ! et d'avoir du temps...
Re: [vidéos] Montage d'une RS-CNC32 en Autriche
Posté : 13 janv. 2020 15:06
par Kachidoki
C'est un malade ! Faut l'embaucher !
Re: [vidéos] Montage d'une RS-CNC32 en Autriche
Posté : 13 janv. 2020 15:40
par nicoco
pfiou, j'avoue il est super fort le type !
Re: [vidéos] Montage d'une RS-CNC32 en Autriche
Posté : 13 janv. 2020 23:27
par woodreff
J'adore le meuble de l'espace le kiff quand tout les câbles sont bien parallèles #satisfaction
Re: [vidéos] Montage d'une RS-CNC32 en Autriche
Posté : 15 janv. 2020 11:01
par fragile63
OMG !!! Il as du braquer un magasin de bricolage
En tous cas il s'en sert, bravo
Re: [vidéos] Montage d'une RS-CNC32 en Autriche
Posté : 15 janv. 2020 11:35
par Gael
Ce meuble/châssis/servante !!!!!!!!! Un malade!
Envoyé de mon iPhone en utilisant Tapatalk
Re: [vidéos] Montage d'une RS-CNC32 en Autriche
Posté : 15 janv. 2020 12:34
par RoMaker
Et en plus il a apparemment pas fini car il y a le système d'aspi/flitration intégré au meuble
Re: [vidéos] Montage d'une RS-CNC32 en Autriche
Posté : 17 janv. 2020 09:25
par lenormand
C'est de toute beauté !!!! Très belle réalisation. Respect ...
Re: [vidéos] Montage d'une RS-CNC32 en Autriche
Posté : 18 janv. 2020 16:43
par borderhoernchen
Hello,
first i dont understand french and my english is not the best but iam the person who made this videos
So if you have any questions please write me a comment on youtube or a message here and i will try to answer
at the moment the rs-cnc is the middle version. i build it for building the others.
the bigger one will have some more aluminium parts which i made with this machine and uses the whole space of the table. and there will be a small version also just for engraving tiny parts.
also there will be a laser version (the middle machine will be modified) in end 2020
all machine excluding the tiny which should fit into the back of the table will be modified with a hook system so the not used machine is stored on the top of the room.
(tables drives below the hooks,plugs outof machine, machine goes up, table drives below the second, machine comes down, plug inserted and ready to go)
and before someone here is asking, i have done the panels for myself (first time using fusion 360) and yes i will share them and also i used other than OSB for the dust box cause i had problems in other project using osb for a dust collector .
if you want do me a favor please subscribe to the youtube channel. my goal is 100 subscribers with this 4 videos for motivating for next videos
thank you
Alex