Fredericton Makerspace Building The I3-RS

Répondre
LHC
Messages : 66
Enregistré le : 09 août 2018 00:25

Fredericton Makerspace Building The I3-RS

Message par LHC »

Hello Everyone !

I'm located in Fredericton, Canada and there's a group of us at the local Makerspace that are planning to build this great printer design of Romain's this winter. At the moment we are studying the plans, pictures, files etc. and I have started to model the printer in Fusion 360 using Romain's solidworks files. It's going very smoothly so far, but I have come across a few small things - mainly questions. I will post them up here when I get a bit further along, but I just wanted to say hi and greetings from a group of makers in Canada that are getting on board the I3-RS train :D

I've added a couple of photos to this post of my results in Fusion 360 so far. I still have the extruder to complete and a few other things.

Lewis
Vous n’avez pas les permissions nécessaires pour voir les fichiers joints à ce message.
LHC
Messages : 66
Enregistré le : 09 août 2018 00:25

Re: Fredericton Makerspace Building The I3-RS

Message par LHC »

Here's the rear view - it didn't seem to attach to the previous posting
Vous n’avez pas les permissions nécessaires pour voir les fichiers joints à ce message.
Avatar du membre
RoMaker
Administrateur du site
Messages : 5063
Enregistré le : 02 janv. 2017 20:24
Localisation : Montpellier
Contact :

Re: Fredericton Makerspace Building The I3-RS

Message par RoMaker »

Hi Lewis ! Nice assembly ;)
LHC
Messages : 66
Enregistré le : 09 août 2018 00:25

Re: Fredericton Makerspace Building The I3-RS

Message par LHC »

RoMaker a écrit : 16 oct. 2018 20:37 Hi Lewis ! Nice assembly ;)
Thought you might like it :lol:

I've got a question on the firmware - what's different about the firmware on your website versus the "standard" marlin firmware for the MKS board? Is there some custom code in there for the led light bar on your design or something like that ? One of the fellows was asking me that the other day.
Avatar du membre
RoMaker
Administrateur du site
Messages : 5063
Enregistré le : 02 janv. 2017 20:24
Localisation : Montpellier
Contact :

Re: Fredericton Makerspace Building The I3-RS

Message par RoMaker »

The firmware on MakerFr is just a stock Marlin configured for the I3-RS
LHC
Messages : 66
Enregistré le : 09 août 2018 00:25

Re: Fredericton Makerspace Building The I3-RS

Message par LHC »

RoMaker a écrit : 17 oct. 2018 11:01 The firmware on MakerFr is just a stock Marlin configured for the I3-RS
ok - thanks for this clarification.
LHC
Messages : 66
Enregistré le : 09 août 2018 00:25

Re: Fredericton Makerspace Building The I3-RS

Message par LHC »

Hello Romain -
While I was importing some of the solid model files you posted, this one was in the group. It looks like it's not used anywhere and perhaps was the starting point for the right and left "y_renforcement_front_A and B" ?

Also there was only one y-renforcement_front" files in the group of solid model files. I just mirrored it and created the other side version.

Just thought you might like to know and update your files sometime.

Best Regards,
Lewis
Vous n’avez pas les permissions nécessaires pour voir les fichiers joints à ce message.
Avatar du membre
RoMaker
Administrateur du site
Messages : 5063
Enregistré le : 02 janv. 2017 20:24
Localisation : Montpellier
Contact :

Re: Fredericton Makerspace Building The I3-RS

Message par RoMaker »

Hi !

This is weird ! maybe a convertion issue from Solidworks format to STEP !?

There is only one y-renforcement_front, it's normal, as you guessed, the second file is just mirrored ;)
LHC
Messages : 66
Enregistré le : 09 août 2018 00:25

Re: Fredericton Makerspace Building The I3-RS

Message par LHC »

Hi Romain -

These items - Standoffs 6-32" male, M3 female - used to attach the heat bed to the frame - can you tell me what the length is ?

I have access to a a pile of old PCs and can get some motherboard standoffs from them, but they are varying sizes.

Thanks !
Lewis
Avatar du membre
RoMaker
Administrateur du site
Messages : 5063
Enregistré le : 02 janv. 2017 20:24
Localisation : Montpellier
Contact :

Re: Fredericton Makerspace Building The I3-RS

Message par RoMaker »

Hi Lewis !
The length of standoffs is 6mm
Romain
Répondre