Electronics problem.
Re: Electronics problem.
I reinstalled the original firmware before I tested the other nunchucks.im not getting 1v on the nunchuck pcb would this be a problem with the arduino or the sheild pcb?
- RoMaker
- Administrateur du site
- Messages : 5063
- Enregistré le : 02 janv. 2017 20:24
- Localisation : Montpellier
- Contact :
Re: Electronics problem.
The 3.3v needed is powered by the mega2560 board.
Remove the shield, power the arduino (with12v max) check the tension between 3.3v output hole and gnd on the arduino.
Remove the shield, power the arduino (with12v max) check the tension between 3.3v output hole and gnd on the arduino.
- RoMaker
- Administrateur du site
- Messages : 5063
- Enregistré le : 02 janv. 2017 20:24
- Localisation : Montpellier
- Contact :
Re: Electronics problem.
i just checked, i got 3.3v on arduino 3.3v output and 3.3v on nunchuk plug, you should have the same
Re: Electronics problem.
All sorted.i had a faulty arduino mega board.once I swapped it out all my problems went away
Re: Electronics problem.
Glad you fixed up your issue.
Re: Electronics problem.
Thanks for all your help and thanks for designing this awesome machine.now I have to go and learn how to use it
Vous n’avez pas les permissions nécessaires pour voir les fichiers joints à ce message.
- RoMaker
- Administrateur du site
- Messages : 5063
- Enregistré le : 02 janv. 2017 20:24
- Localisation : Montpellier
- Contact :
Re: Electronics problem.
Yes ! Happy to hear that