Hello,
while i still have some problems to mill without a hangup of the machine a friend of mine asked me if i have the schematics of the red board, to see from where the problem can come, and how to solve it. He works in the HF area and is very familiar with problems like this.
Georg
Schmematics of the red gerbl board - where to find
-
- Messages : 68
- Enregistré le : 03 déc. 2020 11:42
Re: Schmematics of the red gerbl board - where to find
You should ask it to Romain but I am sure that your issue is not related to the design of the board because there are no real HF signal involved.
Re: Schmematics of the red gerbl board - where to find
Moreover, the issue is more likely EMC related (radiated or conducted), that is tightly related to the layout of the board (which you can see yourself) or the wiring and less to the schematic.
Otherwise you should ask to Romain to get the schematic, but he is really busy these last times, he is just became daddy.
Otherwise you should ask to Romain to get the schematic, but he is really busy these last times, he is just became daddy.