21 résultats trouvés

par xaocass
02 mars 2020 13:54
Forum : R-CNC electronic
Sujet : R-CNC Z-probe and Auto level
Réponses : 3
Vues : 8578

Re: R-CNC Z-probe and Auto level

Any news about z-probe? Has anybody added it on R-CNC?
I want to make PCB's and it would be very useful. One more problem I have is even when milling wood, my table is not very straight.
Is possible to add a probe to R-CNC or maybe it's better to just make RS-CNC32?
par xaocass
14 nov. 2019 08:25
Forum : Vos objet imprimés et fraisés
Sujet : essais fraisage PCB
Réponses : 48
Vues : 30743

Re: essais fraisage PCB

Result looks really good! Would you mind sharing the whole process how you prepared PCB design and how you have generated g-code for that? What endmills are you using? I have a lot of projects waiting for milled PCB and just can't start them because I have not yet worked out how to mill PCBs. PS. So...
par xaocass
25 févr. 2019 19:02
Forum : R-CNC Adjustments
Sujet : Strange error
Réponses : 7
Vues : 7583

Re: Strange error

No, atm I've left everything as in the tutorial for R-CNC. You think those pauses are caused by that?
par xaocass
25 févr. 2019 12:25
Forum : R-CNC Adjustments
Sujet : Strange error
Réponses : 7
Vues : 7583

Re: Strange error

OK, flashed repetier instead of marlin and now my "print" is fine! :) Thank You! But there is very strange thing going on - looks like it makes a small (half a second, maybe less) pause between commands. In Places where marlin went smoothly, it now makes some stops/pauses. Maybe there is s...
par xaocass
21 févr. 2019 12:17
Forum : R-CNC Adjustments
Sujet : Strange error
Réponses : 7
Vues : 7583

Re: Strange error

Thanks a lot! I'll try that. All the settings are default, as downloaded from makerfr.com :) By the way, what do you think about my feedrate of 700mm/m with 4mm depth in plywood? Maybe I should go even faster? At the moment my full model is estimated by fusion360 to be about 5h long, and as I still ...
par xaocass
21 févr. 2019 12:03
Forum : R-CNC Adjustments
Sujet : Strange error
Réponses : 7
Vues : 7583

Strange error

Hello, I need some help with debugging. I'm working on big part I'm planing to make and making some test cuts. When I've done 4cm long pockets everything looked great. Now I've made them 20cm long and some strange problems started. After the first pass there appears an error on X direction and posit...
par xaocass
09 oct. 2018 21:03
Forum : R-CNC Adjustments
Sujet : Dust shoe?
Réponses : 5
Vues : 7755

Dust shoe?

Atm I'm standing near the CNC for the whole duration of cutting and holding vacuum hose hear end mill. And it's not only tiresome but also not very effective - quite a lot of dust escapes. I've searched thingiverse, but there are only 2 solutions that don't look very good to me. Please share how are...
par xaocass
23 juil. 2018 09:45
Forum : R-CNC Adjustments
Sujet : My first run: collet chuck adapter failed
Réponses : 5
Vues : 7463

Re: My first run: collet chuck adapter failed

I've got new adapter :) This time I first tried everything with a foam (used for house insulation). Of course it worked well. So I've started my second try with plywood. This time I've made 3mm deep cuts and everything went well, until the last pass, when my endmill broke :D I think next time I'll t...
par xaocass
19 juil. 2018 18:27
Forum : GRBL32bits V1.0/1.5
Sujet : RS-CNC vs. R-CNC
Réponses : 2
Vues : 4044

RS-CNC vs. R-CNC

At last, there is a tutorial for RS-CNC! I've been waiting so long for it, because reading french forum with google translate is a little difficult :) What I wanted to ask, is how much rs is better than r? I'm just starting to make my first cuts with R-CNC and I think is it necessary to plan for an ...
par xaocass
24 juin 2018 21:34
Forum : R-CNC Adjustments
Sujet : My first run: collet chuck adapter failed
Réponses : 5
Vues : 7463

Re: My first run: collet chuck adapter failed

A photo of the "results" :)

Image
Image