10 résultats trouvés
- 18 août 2018 02:51
- Forum : I3 RS 3D printer
- Sujet : I3-RS with dual Z braces
- Réponses : 2
- Vues : 7417
Re: I3-RS with dual Z braces
Hi, Romain! I follow all instructions as described but my extruder its an MK8, maybe my extruder mount cause this twist and the only way to correct BAL was add a second Z brace.
- 17 août 2018 12:29
- Forum : I3 RS 3D printer
- Sujet : I3-RS with dual Z braces
- Réponses : 2
- Vues : 7417
I3-RS with dual Z braces
I had a lot of problems with bed auto level one side of my first layer is stick on the heated but the other side its a bit height. And note that only one Z-brace (Z-reinforcement) cause a twist in my X axis, and a disfunction on BAL (bed auto level) so I decided remix the Z-reinforcement to avoid th...
- 31 juil. 2018 12:30
- Forum : I3 RS 3D printer
- Sujet : Mk8 Extruder with I3-RS
- Réponses : 1
- Vues : 5908
Mk8 Extruder with I3-RS
Hi! Im almost finishing my I3-RS building and use MK8 Extruder instead of the great Romain design. In the past I have a lot of problems with this extruder (E3D-V6) and decided to move for an Geetech MK8. I designed an mount for a MK8 extruder that fits to X dolly of I3-RS and using a 18 mm NPN NO ca...
- 05 juil. 2018 01:35
- Forum : I3 RS 3D printer
- Sujet : Z-Offset
- Réponses : 1
- Vues : 6040
Z-Offset
Hi! Im building I3-RS and would like to change Z-Offset through the TFT LCD, I looked for this feature and can't find. Is it possible to adjust Z-offset through TFT LCD?
Thanks
André Mesquita
Thanks
André Mesquita
- 16 juin 2018 18:30
- Forum : R-CNC Adjustments
- Sujet : Tool change during a job: How are you doing it?
- Réponses : 5
- Vues : 7814
Re: Tool change during a job: How are you doing it?aq
Thanks for the explanations.
I 'll try Repetier Firmware. Which microstepping are you using?1/16?
I 'll try Repetier Firmware. Which microstepping are you using?1/16?
- 16 juin 2018 15:10
- Forum : R-CNC Adjustments
- Sujet : Tool change during a job: How are you doing it?
- Réponses : 5
- Vues : 7814
Re: Tool change during a job: How are you doing it?
Hi Aze,
Thanks for the fast reply!
Are you using different g-codes to each tool?
You are using Repetier firmware instead Marlin firmware. Why?
Is it possible Make a change tool using a unique g-code, pause the Machine and restart from that point?
André Mesquita
Thanks for the fast reply!
Are you using different g-codes to each tool?
You are using Repetier firmware instead Marlin firmware. Why?
Is it possible Make a change tool using a unique g-code, pause the Machine and restart from that point?
André Mesquita
- 16 juin 2018 02:13
- Forum : R-CNC Adjustments
- Sujet : Tool change during a job: How are you doing it?
- Réponses : 5
- Vues : 7814
Tool change during a job: How are you doing it?
Hi Guys!
I’m wondering how you people are dealing with tool changes.
If anyone can provide me with detailed information I would be grateful.
André Mesquita
I’m wondering how you people are dealing with tool changes.
If anyone can provide me with detailed information I would be grateful.
André Mesquita
- 19 nov. 2017 13:41
- Forum : R-CNC electronic
- Sujet : Spindle RPM Control for R-CNC
- Réponses : 2
- Vues : 6876
Re: Spindle RPM Control for R-CNC
Ok. It was tagged as a remix of R-CNC.
Thanks
André
Thanks
André
- 18 nov. 2017 20:18
- Forum : R-CNC electronic
- Sujet : Spindle RPM Control for R-CNC
- Réponses : 2
- Vues : 6876
Spindle RPM Control for R-CNC
This message is just to show my contribution. Its just an arduino spindle rpm control using arduino nano board, All files are available to download at:
https://www.thingiverse.com/thing:2641812
https://www.thingiverse.com/thing:2641812
- 08 nov. 2017 15:20
- Forum : R-CNC electronic
- Sujet : R-CNC Z-probe and Auto level
- Réponses : 3
- Vues : 9314
R-CNC Z-probe and Auto level
Finally I finished this fantastic machine thanks to Romaker. I'm waiting my 52 mm spindle from aliexpress. I tested with a pencil and works great. The arduino is resetting when I move the x axis in a negative value. I read about changes in speed and acceleration can solve this problem in another top...