That worked perfect! Thanks so much for the helpstu_le_brew46 a écrit : ↑02 août 2020 11:24 I have just checked my notes on GRBL, its the $23 command which changes the direction for homing so in my case $23=2 inverts the Y axis homing, sorry should have checked my notes earlier, anyway this should fix the homing issue
9 résultats trouvés
- 02 août 2020 12:06
- Forum : GRBL32bits V1.0/1.5
- Sujet : Homing X and Y
- Réponses : 11
- Vues : 5869
Re: Homing X and Y
- 02 août 2020 11:28
- Forum : GRBL32bits V1.0/1.5
- Sujet : Homing X and Y
- Réponses : 11
- Vues : 5869
Re: Homing X and Y
Thanks will update
- 02 août 2020 11:14
- Forum : GRBL32bits V1.0/1.5
- Sujet : Homing X and Y
- Réponses : 11
- Vues : 5869
Re: Homing X and Y
Okay so how did you make the change? What software and do you remember the settings?
- 02 août 2020 11:09
- Forum : GRBL32bits V1.0/1.5
- Sujet : Homing X and Y
- Réponses : 11
- Vues : 5869
Re: Homing X and Y
Here is the errors I am getting on homing
- 02 août 2020 10:40
- Forum : GRBL32bits V1.0/1.5
- Sujet : Homing X and Y
- Réponses : 11
- Vues : 5869
Re: Homing X and Y
Thanks for the help, yes it was wiring causing the Z to only go down - the DuPont connector on the board was no good. How I fixed the orientation issue above was to use the wizard on universal gcode sender https://winder.github.io/ugs_website/ you can move the axis's during the wizard setup so it wa...
- 02 août 2020 05:22
- Forum : GRBL32bits V1.0/1.5
- Sujet : Homing X and Y
- Réponses : 11
- Vues : 5869
Re: Homing X and Y
Thanks for the help - I figured some of it out with the use of universal gcode sender. I have the machine set in the correct orientation Now I have another problem the Z only travels down (with the PC and also nuchuck) Has anyone had this issue? Should I re-flash the firmware? or something along tho...
- 01 août 2020 10:08
- Forum : GRBL32bits V1.0/1.5
- Sujet : Homing X and Y
- Réponses : 11
- Vues : 5869
Homing X and Y
Hi, I have everything setup from my new build and it is working mechanically the one problem I am having with it is to get it to home on the X and Y axis. I start the homing cycle and the Z hits the stop and resets then the Y starts but heads away (wrong direction) from the limit switch. Everything ...
- 02 juin 2020 06:49
- Forum : Mécanique RS-CNC / RS-CNC32
- Sujet : Achat du kit sur aliexpress ?
- Réponses : 337
- Vues : 136964
Re: Achat du kit sur aliexpress ?
Hi,
I ordered the kit on the 27th of April and from the tracking it just arrived in country and might be delivered in the next day or two. The shipping was fast once it got sent (via TNT)
I ordered the kit on the 27th of April and from the tracking it just arrived in country and might be delivered in the next day or two. The shipping was fast once it got sent (via TNT)
- 25 avr. 2020 06:49
- Forum : GRBL32bits V1.0/1.5
- Sujet : New Zealand Builds?
- Réponses : 0
- Vues : 2332
New Zealand Builds?
Hi all,
Just wondering if there has been any New Zealand based builds lately? I am in the process and have a few questions on where I can get some of the hardware
Just wondering if there has been any New Zealand based builds lately? I am in the process and have a few questions on where I can get some of the hardware