MakerFr.com

stu_le_brew46 a écrit : ↑02 août 2020 11:24 I have just checked my notes on GRBL, its the $23 command which changes the direction for homing so in my case $23=2 inverts the Y axis homing, sorry should have checked my notes earlier, anyway this should fix the homing issue

That worked perfect! Thanks so much for the help

Thanks will update

Okay so how did you make the change? What software and do you remember the settings?

Here is the errors I am getting on homing

Thanks for the help, yes it was wiring causing the Z to only go down - the DuPont connector on the board was no good. How I fixed the orientation issue above was to use the wizard on universal gcode sender https://winder.github.io/ugs_website/ you can move the axis's during the wizard setup so it wa...

Thanks for the help - I figured some of it out with the use of universal gcode sender. I have the machine set in the correct orientation Now I have another problem the Z only travels down (with the PC and also nuchuck) Has anyone had this issue? Should I re-flash the firmware? or something along tho...

Hi, I have everything setup from my new build and it is working mechanically the one problem I am having with it is to get it to home on the X and Y axis. I start the homing cycle and the Z hits the stop and resets then the Y starts but heads away (wrong direction) from the limit switch. Everything ...

Hi,
I ordered the kit on the 27th of April and from the tracking it just arrived in country and might be delivered in the next day or two. The shipping was fast once it got sent (via TNT)

Hi all,

Just wondering if there has been any New Zealand based builds lately? I am in the process and have a few questions on where I can get some of the hardware