9 résultats trouvés
- 06 déc. 2021 11:43
- Forum : GRBL32bits V1.0/1.5
- Sujet : [SOLVED] Reset ESP32 TFT
- Réponses : 11
- Vues : 3758
Re: Reset ESP32 TFT
Problems solved, the cover of the tft was pushing the contacts of the nunchuck as a result to not working the nunchuck, thanks for your help!
- 02 déc. 2021 18:56
- Forum : GRBL32bits V1.0/1.5
- Sujet : [SOLVED] Reset ESP32 TFT
- Réponses : 11
- Vues : 3758
Re: Reset ESP32 TFT
Thanks mate, the connection between the two boards is made like the assembly manual, i have just used shorter cables female to female, but non shielded. You think that might be the problem with the nunchuck? Before the update my nunchuck was working perfect. It seems to be the only problem at the mo...
- 02 déc. 2021 15:08
- Forum : GRBL32bits V1.0/1.5
- Sujet : [SOLVED] Reset ESP32 TFT
- Réponses : 11
- Vues : 3758
Re: Reset ESP32 TFT
Also on tft with red letters says "GRBL connection : wires (serial) " that's normal right? I have connected to wifi
- 02 déc. 2021 15:00
- Forum : GRBL32bits V1.0/1.5
- Sujet : [SOLVED] Reset ESP32 TFT
- Réponses : 11
- Vues : 3758
Re: Reset ESP32 TFT
[...] It (the ESP-32] continues to restart the TFT after some seconds. I will check again all the cables. Can you please post a photography and the reference of your ESP-32 model? See ya, So i replaced the cables that connect esp32 tx, rx, gnd, 5v with shorter cables and that fixed the problem with...
- 02 déc. 2021 11:42
- Forum : GRBL32bits V1.0/1.5
- Sujet : [SOLVED] Reset ESP32 TFT
- Réponses : 11
- Vues : 3758
Re: Reset ESP32 TFT
Re mathiu , [...] im searching right now on how to erase it and flash again to see if that will fix the problem. [...] Here is the procedure: 1 - Download "Flash Dowload Tool" at ESPRESSIF's website here 2 - Install it, but do not run it yet 3 - Take off the ESP-32 from the Grbl board ada...
- 02 déc. 2021 10:23
- Forum : GRBL32bits V1.0/1.5
- Sujet : [SOLVED] Reset ESP32 TFT
- Réponses : 11
- Vues : 3758
Re: Reset ESP32 TFT
Hi mathiu , Did you find any solution to your problem? I have the same with the tft that restarts Did you recently updated the firmware of the TFT (for example, from the version without icons to the version with icons)? In this case, did you completely erase the ESP-32 prior to flash it? It's an im...
- 02 déc. 2021 00:51
- Forum : GRBL32bits V1.0/1.5
- Sujet : [SOLVED] Reset ESP32 TFT
- Réponses : 11
- Vues : 3758
Re: Reset ESP32 TFT
Did you find any solution to your problem? I have the same with the tft that restarts
- 01 sept. 2019 13:33
- Forum : GRBL32bits V1.0/1.5
- Sujet : Tft dont open with GRBL 32bits board
- Réponses : 2
- Vues : 2754
Re: Tft dont open with GRBL 32bits board
Solution after translating the topic viewtopic.php?f=47&p=21650#p21650
- 29 août 2019 21:06
- Forum : GRBL32bits V1.0/1.5
- Sujet : Tft dont open with GRBL 32bits board
- Réponses : 2
- Vues : 2754
Tft dont open with GRBL 32bits board
Greetings everyone so I've ordered the grbl 32 bits board and a tft screen I followed the instructions of the site but when I upload the code the screen remains black, nothing appears. Is there any code just to check the tft?Just to know if I need to buy a new one